EUCHNER 099265 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 38

EUCHNER 099265 Скачать руководство пользователя страница 29

Manual EKS Ethernet TCP/IP

2547185-01-10/22

Subject to technical modifications

Page 29/38

7.2 Configuring the read/write station via the web interface

The device can be configured with a web browser.
If you wish to operate the read/write station

with a self-defined, fixed IP address, it is recommended to configure

the device with a PC. This is the fastest method, particularly if several devices have to be configured. The

configuration PC must meet the following requirements:



Network card



Web browser (e.g. Microsoft Edge)



If the configuration PC features a firewall, it may be necessary to enable the EKS read/write station as a

trustworthy application. Refer to the firewall documentation for further information.

Launching the EKS web interface

Use of the web interface is described below.

Information!

You will find the DIP switch setting for activating the web interface in chapter 4.7.3.

1. Open a browser window and enter the default IP address http://192.168.1.1/ or the IP address you have

assigned for the EKS read/write station. If necessary, first reset the default IP address (see chapter 6.1.1.1).

If the EKS read/write station is located in a network with DHCP server, enter the automatically assigned IP

address.



The

Information

screen for the EKS web interface is now displayed.

«
...
27
28
29
30
31
...
»

Содержание 099265







































Отзывы:

Нет отзывов