ETOP P/I-P3BVL, Руководство пользователя

Страница: 56 / 68

Chapter 3 BIOS Configuration
50 P/I-P3BVL User's Manual
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU's internal clock. If
the Max. Power Saving is not enabled, this will be preset to NO.
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank, Default setting, blank the screen and turn off
vertical and horizontal scanning.
DPMS
Allows the BIOS to control video display card if it
supports the DPMS feature.
Blank Screen This option only writes blanks to the video buffer.
Video Off After
As the system moves from lesser to greater power-saving modes, select
the mode in which you want the monitor to blank.
Modem Use IRQ
This field names the interrupt request (IRQ) line assigned to the
modem (if any) on your system. Activity of the selected IRQ always
awakens the system. By default, the IRQ is set to
3
.
Doze Mode
When enabled, and after the user-defined time of system inactivity, the
CPU clock will run at a slower speed while all other devices still operate at
full speed.
Standby Mode
After the user-defined time of system inactivity, the hard disk drive and
the video will shut off while all other devices still operate at full speed.
Suspend Mode
When enabled, and after the user-defined time of system inactivity, all
devices except the CPU will be shut off.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of
the time. You may select the percent of time that the clock runs.