manualshive.com logo in svg

ETC Insight 2x, Руководство пользователя, Страница: 92 / 386

Поделиться
Скачать
ETC Insight 2x Скачать руководство пользователя страница 92

80

Insight 2x user manual

Track record

When you record a series of cues, you typically record the first cue, then 
build the second cue from the first. Some of the channels change, but 
many remain the same

. The third cue is built from the second and so on. 

This procedure results in many channels being set to a level in one cue 
and staying at that level for several cues. 

A channel whose level does not change through a series of consecutive 
cues is said to “track” from cue to cue. That same sequence of 
unchanged levels is also referred to as a “track.” The [Track] key creates 
tracks by pulling channel levels from the previous cue (in Blind mode), or 
by adding tracks to existing cues (in either Blind, Stage or Tracksheet).

Rising channel levels are displayed in blue in the Blind display

. Falling 

channel levels are displayed in green. Channel levels displayed in magenta 
indicate that the channel is tracking, i.e., that its level is the same as in the 
previous cue.

The following examples demonstrate how Track works

. They include five 

cues, each with five channels

. In these examples, when a channel 

changes level from one cue to the next it is printed in 

bold

; tracked chan-

nels are printed normally

. This corresponds to how Blind displays levels – 

channels that rise or fall are displayed in blue or green; tracked channels 
are displayed in magenta.

Содержание Insight 2x



































































































































































































































































































































































































Отзывы:

Нет отзывов