manualshive.com logo in svg

ETC Insight 2x, Руководство пользователя, Страница: 198 / 386

Поделиться
Скачать
ETC Insight 2x Скачать руководство пользователя страница 198

186

Insight 2x user manual

Groups

Print Groups prints a list of groups recorded in the currently loaded show. 
Groups are listed by number. Information provided includes the group’s 
label and the levels of all channels included in each group. 

To print a full list of groups, follow these steps:

To print a partial group printout from the Print menu, follow these steps:

Keystrokes:

Action:

1.

Press [Setup].

Displays Setup menu

2.

Press [5], 

Print Functions

, 

[Enter].

Displays Print Functions menu

3.

Press [3], 

Print

 

Groups

, 

[Enter].

Prompt reads: 

Press ENTER to print all groups, or 
select 1st group number to print

4.

Press [Enter].

Prompt reads:

To confirm, press ENTER
To cancel, press CLEAR

5.

Press [Enter], or press 
[Clear] to cancel the print 
operation.

File sent to the printer

Keystrokes:

Action:

1.

Press [3], 

Print

 

Groups

, 

[Enter].

Prompt reads: 

Press ENTER to print all cues, or 
select 1st cue number to print

2.

Use the keypad to enter 
the first group in the range 
you wish to print. Press 
[Enter].

Prompt reads: 

Press ENTER to print cue, or select 
last cue number to print

3.

Use the keypad to enter 
the last group in the range 
you wish to print. Press 
[Enter].

File sent to the printer

Содержание Insight 2x



































































































































































































































































































































































































Отзывы:

Нет отзывов