manualshive.com logo in svg

ETC Insight 2x, Руководство пользователя, Страница: 107 / 386

Поделиться
Скачать
ETC Insight 2x Скачать руководство пользователя страница 107

chapter 8 multipart cues

95

Adding, deleting and modifying channels 

Follow these steps to edit channels in a multipart cue:

Note: When you initially display a multipart cue, any channel levels  that 
are tracking from the previous cue are displayed in green; new levels are 
displayed in blue. When you press [Part] this changes. Channels that 
make up the selected part are now displayed in blue; channels that make 
up other parts of the multipart cue are displayed in green (or gray, in Blind).

Keystrokes:

Action:

1.

Press [Blind].

Selects Blind display mode

2.

Enter the cue number. 

Prompt reads: 

Select cue number
To select cue type, press TYPE

3.

Press [Part]; then press 
[+] or [–] until the desired 
part is displayed.

Prompt reads: 

Select part number

4.

Press [Channel], and 
select the desired chan-
nels.

Prompt reads: 

Select channel numbers

5.

Set channel levels. (Use 
[At], the fader wheel, [Full] 
or [Level], or [+] and [–]. 
Press [At] [Clear] to delete 
the channels.)

If the channels are new, this adds 
them to the part at the level indicated. 
If already in the part, this modifies 
their level

6.

Press [Record] [Enter].

Records the modified part

Содержание Insight 2x



































































































































































































































































































































































































Отзывы:

Нет отзывов