manualshive.com logo in svg

ETC Insight 2x, Руководство пользователя, Страница: 190 / 386

Поделиться
Скачать
ETC Insight 2x Скачать руководство пользователя страница 190

178

Insight 2x user manual

Diskette management

Insight 2x’s diskette drive lets you save one show per high density 3.5-
inch computer diskette

. This allows you to work on more than one show 

at a time or to use more than 600 cues for your production by loading a 
second show into memory. 

Label each diskette carefully and clearly to help you keep track of what 
show is on the diskette. You can also use the Read Show from Disk option 
to find out the name, storage date and time of the show on any diskette.
 
Note: For information on naming a show in the Setup menu, see page 27.

We recommend that you make two back-up copies of each show on sep-
arate diskettes and that you keep them in different locations

. If your show 

diskette were damaged, a back-up diskette stored at home could save you 
hours of work.

When you select diskette options, any fades in progress are stopped

. 

Therefore, if you need to load an additional show in the middle of a perfor-
mance, load it between cues when all channels are static

. Fader and sub-

master outputs are maintained as the new show loads.

Before you can use a diskette in Insight 2x, you must format it on the con-
sole or on an IBM PC-compatible with a high-density drive

. Formatting 

instructions are on the following page.

Storing diskettes

•

Store diskettes at a temperature between 50 and 140 degrees Fahr-
enheit.

•

Keep diskettes away from magnets, magnetized objects or heavy 
electrical equipment, including large lighting equipment.

•

Do not touch the magnetic disk inside the plastic diskette case.

•

Do not eat, drink or smoke when you handle diskettes.

Содержание Insight 2x



































































































































































































































































































































































































Отзывы:

Нет отзывов