ETC Insight 2x, Руководство пользователя, Страница: 159 / 386

chapter 12 effects 147
Creating steps
Create an effect by selecting the effect type for a cue or submaster, then
creating a series of steps in the Effect display. Use the arrow keys to
move around the Effect display and enter settings. When you create a
new step, it takes the previous step’s attributes as its defaults. You may
then edit the new step.
To edit a step attribute, use the arrow keys to select the field of the
attribute you wish to edit. Use the keypad to enter the new setting for that
attribute. Then, either press [Enter] to confirm the change without leaving
the attribute field or press any arrow key to make the change and move
to a different attribute field. You can also use softkeys to move from field
to field.
Follow these instructions to create a series of steps:
Keystrokes:
Action:
1. Press [Blind].
Selects the Blind display
2. Press [Cue] or [Sub] [1].
Selects cue or submaster 1
Prompt reads:
Select cue number
To select cue type, press TYPE
or...
Select submaster number
To select submaster type, press
TYPE
3. Press [Type].
Prompt reads:
Select fade type (1 = Crossfade,
2 = Allfade, 3 = Effect, or
4 = Subroutine)
or...
Select submaster type
(1 = Pile-on, 2 = Inhibitive, 3 = Effect)
4. Press [3].
Identifies cue or submaster 1 as an
effect. Selects Effect display
Prompt reads:
Select step numbers
5. If you are creating an
effect submaster, press
[S7],
More Softkeys ,
6. Press [S1], Step , and enter
the number of the step to
edit. Press [Enter].
Prompt reads:
Select channel numbers (Precede
with AND to add to existing step, or
EXCEPT to delete from step
7. Use the keypad to enter
the channels or groups you
want to include in the step,
then press [
→
].
Prompt reads:
Select step time
8. Use the keypad to enter
step time (range is 0 to
9:59 minutes), then press
[
→
].
Prompt reads:
Enter step in time