ETC Insight 2x, Руководство пользователя, Страница: 360 / 386

350 Insight 2x user manual
On Sub-Bump
On Sub-Bump is softkey [S1] after [S7], More Softkeys, in the Macro
Editing and Designer’s Worksheet Editing displays
Use [S4], On Sub-Bump , in a macro instruction to force the submaster on
via the submaster bump button. The upfade will occur in the upfade time
for that bump button. Use the actual submaster bump button or the
keypad when recording the macro. The submaster will fade out after the
dwell time has elapsed, unless it is programmed with a hold.
Only
Use [Only] to select a subset of the currently selected channels.
Example: [Group] [2][5] [And] [2][6] [Only] [Group] [5] [At] [7][5] [Only]
[Group] [1][0] [At] [5][0] takes all the channels that are in group 25 and 26,
sets those channels that are also in group 5 to 75 percent, and sets those
that are also in group 10 to 50 percent.
Page
Use [Page] to load a different page into the submasters. Active submas-
ters will hold their current look until the associated slider has been
returned to its home position (zero for pile-on or effect submasters,
10 for
inhibitive submasters.
Example: [Page] [2] [Enter] loads submaster page 2.
Park
Park is softkey [S6] in the Stage and Fader displays
Press [S6], Park , set a dimmer, channel or group at a specified level.
Parked dimmers, channels or groups will remain at their park level until
unparked.
Part
Use [Part] to break a cue into multiple fades. Each cue may contain up to
eight parts. A wait time may be assigned to each part to hold the start of
that part. A cue may be recorded as a multipart cue or may be broken into
multiple parts at a later time. A channel may be in only one part.
Example: [Stage] [15] [Record] [5] [Part] [1] [Enter] records channel 15’s
current level into part 1 of cue 5.
Patch
The Patch display provides a list of dimmer-to-channel assignments, with
associated proportional levels and profiles.