ETC Insight 2x, Руководство пользователя, Страница: 132 / 386

120 Insight 2x user manual
Only
Only allows you to select several groups and then adjust only the channels
the groups have in common. For example, say you are working with
moving lights. Each fixture is controlled by a number of channels, each of
which controls a single parameter (level, tilt (vertical movement), pan (hor-
izontal movement), colors, and so forth). You create groups that contain
all the control channels for each light, as shown below.
In the example below, each group contains six channels, corresponding to
pan, tilt, intensity, cyan, magenta, and yellow for a specific fixture.
Group 1 contains all channels for fixture 1
01 02 03 04 05 06
Group 2 contains all channels for fixture 2
11 12 13 14 15 16
Group 3 contains all channels for fixture 3
21 22 23 24 25 26
Group 4 contains all channels for fixture 4
31 32 33 34 35 36
Next you create a set of groups that each contain all the channels that con-
trol one parameter for your moving lights.
Group 5 contains all pan-controlling channels
01 11 21 31
Group 6 contains all tilt-controlling channels
02 12 22 32
Group 7 contains all level-controlling channels
03 13 23 33
Now, say you wish to change the level for fixtures 1 and 3. The following
keystrokes would select only the appropriate channels.
[Group] [1] [And] [3] [Only] [Group] [7]
This selects groups 1 and 3, which correspond to fixtures 1 and 3, then
selects only the channels in those groups which are also in Group 7, the
level group (3 and 23). You may now press [At] [7][5] to set the levels of
the two fixtures at 75 percent.