manualshive.com logo in svg

ETC Insight 2x, Руководство пользователя, Страница: 218 / 386

Поделиться
Скачать
ETC Insight 2x Скачать руководство пользователя страница 218

206

Insight 2x user manual

Macro controls

The five macro keys allow you to access macros. M1, M2, M3, and M4 
allow you to access macros 1,951 through 1,954. M* allows you to enter 
any other macro. To access other macros, press [M*], enter the desired 
macro number, and press [Enter].

Fader controls

The fader control keys allow you to play back cues in the console's cross-
faders. [Go] controls the AB fader pair; the remaining keys function as on 
the console keypad.

Other controls

The remaining controls enable you to select dimmers, channels, groups, 
and cues. Keys function as they do on the console keypad.

Connector

Connector for hard wire connection to receiving unit.

Press [On] key on the infrared controller to turn power on. The unit shuts 
off after three minutes if no key is pressed. The unit is powered by a 9V, 
size PP3 battery.

Console controls and the infrared controller may operate simultaneously. 
Changes made from both console and infrared controller are displayed 
immediately on the console monitor.

Содержание Insight 2x



































































































































































































































































































































































































Отзывы:

Нет отзывов