CU-DIN R 4-CH 16 A KNX
CU-DIN R 8-CH 16 A KNX
46 / 54
CU-DIN R 12-CH 16 A KNX
USER MANUAL
6 Communication objects description
This section will introduce the communication objects, the objects will show by
enabling the function.
Note:
take channel A as an example; other channels are the same as A.
6.1 Objects “General” and “Output A”
NO. Object name
Function
Flags
Data type
0
General
Send cycles
C R T
EIS1
DPT 1.003
1 bit
This communication object is always active and valid. Invert the value and
send telegram to bus in next frame. e.g. last telegram value is “1”, next
telegram value is “0”
Table 2. General object
NO Object name
Function
Flags
Data type
10 Output A
Channel output C W U
EIS1
DPT 1.001
1 bit
This communication object of the channel output used for switching a channel
ON/OFF; the switch output is ON when the object receives the value “1”. The
switch output is OFF when the object receives the value “0”.
Table 3. Output objects
