CU-DIN R 4-CH 16 A KNX
CU-DIN R 8-CH 16 A KNX
5 / 54
CU-DIN R 12-CH 16 A KNX
USER MANUAL
3 Product function
The switch actuators can be used for 4, 8 and 12 channels independent AC/DC
loads. The outputs for MAX 16 A can be switched ON or OFF on every output
channel and can be switched manually too. The CU-DIN R 4-CH does not
require an additional power supply. The CU-DIN R 8-CH and CU-DIN R 12-CH
require an additional 24 V DC power supply if all of the channels are frequently
operated at the same time, but normal operation is also possible if there is no
additional power supply. The following functions can be set individually for each
output channel:
Channel state response
Channel state after bus voltage
failure and recovery
Time function
Flashing
Staircase light
Delay
Scene
Scene number: 1-64
Threshold
Two threshold values
Curtain
Top/left<->bottom/right
Logic
AND/OR/XOR/GATE
Heating control
PWM
