CU-DIN R 4-CH 16 A KNX
CU-DIN R 8-CH 16 A KNX
37 / 54
CU-DIN R 12-CH 16 A KNX
USER MANUAL
Control mode
Options:
Move UP/DOWN and Adjustment
Move UP/DOWN
Move UP/DOWN and Adjustment: This selection can control the blinds UP or
DOWN and can adjust the blinds too.
Move UP/DOWN: This selection can only control the blinds UP or DOWN
Adjustment time
This parameter sets the blind adjustment time. The maximum time is 5 s, the
minimum time is 50 ms
Delay time for running direction changed
When the running direction changes, there is a delay time of 50–5000 ms. The
maximum time is 5 s, the minimum time is 50 ms
Moving time (2–65,535 s):
This parameter sets the total time for the blinds to move. Options: 0– 65,535 s
5.5.7 Channel function “Logic”
Logic function contains two logic blocks. Both logic block 1 and
2 allow selection of “AND”, “OR”, “XOR” or “GATE” logic by user
Note:
A=Channel A
Con1=Logic connection 1
Con2=Logic connection 2
