CU-DIN R 4-CH 16 A KNX
CU-DIN R 8-CH 16 A KNX
45 / 54
CU-DIN R 12-CH 16 A KNX
USER MANUAL
No response: No response of switch state.
Always respond: Always receives a response of the switch state when the channel
telegram data is received.
Only after change: Only receives a response of the switch state when the channel
state is changed.
"ON" position of value
This parameter will set the valve of the PWM (pulse width).
Options:
0% (OFF)
10% (26)
20% (51)
30% (77)
40% (102)
50% (128)
60% (153)
70% (179)
80% (204)
90% (230)
100% (ON)
Running automatically after bus voltage recovery
Options:
No
Defined value
Recovery
No: PWM not running automatic power on.
Defined value: PWM running by set valve.
Recovery: PWM automatic running by last save value.
Forced position (‘1’-forced,’0’-cancel)
Options:
No
Yes
No: No need to force run.
Yes: Forced run needed.
Valve of PWM
The value of PWM for forced position.
Forced cancel operation
Options:
Stop heating
Return to normally heating value
Stop heating: When forced operation is cancelled, stop heating.
Return to normally heating value: When forced operation is cancelled, return to
normal heating value.