E-SL 450BD Series Instruction Manual
Installation of Motor
7
Horizontal position of gate bracket:
The hole in the gate brack-
et should be mounted on the gate so it is centered with the
idler gears horizontally. Depending on how close you mounted
the gate opener from the rear face of the gate you may need to
shim your bracket to make it protrude off the back of the gate
more to achieve this.
Vertical position of gate bracket:
The hole in the gate bracket
should be level with the top of the idler gears when mounted
on the gate.
After identifying the correct height for the gate bracket, bolt
the bracket to your gate frame using the three mounting holes.
The flat side with a single hole should be facing in toward the
center of the gate.
On one side of the gate lay the belt into the belt attachment
bracket so the teeth of the belt mesh the teeth of the bracket.
