E-SL 450BD Series Instruction Manual
Tools Needed For Installation
3
• Power Drill
• Crescent Wrench
• Metal Drill Bits
• Hacksaw
• Flat Head Screwdriver
• Phillips Head Screwdriver
• Tape Measure
• Level
• Wire Strippers
• C-clamps
Other items that may be needed prior to commencing installation:
• Cement, boards for a slab frame, and a trowel.
• Low voltage wire will be required to run power to your operator. See the power page for
specifications.
• If the gate is more than 144’ from an a/c power supply then an electrician will be required
to move a supply closer.
• Depending on the current base, you may need cement to form a level mounting pad.
• A voltage meter may be necessary to run diagnostic checks.
• A digital camera will come in handy with technicians if any support is needed.
