GB
Via Mantova, 177/A - 37053 Cerea (Verona) Italy - Tel. 0442 330422 r.a. - Fax 0442 331054 - e-mail: [email protected] - www.fadini.net
®
INSTALLATION MANUAL
APROLI
280
BATT
The growth of MECCANICA FADINI has always been based
on the development of guaranteed products thanks to our
“TOTAL QUALITY CONTROL” system which ensures constant
quality standards, updated knowledge of the European
Standards and compliance with their requirements, in view
of an ever increasing process of improvement.
EUROPEAN MARK CERTIFYING CONFORMITY
TO THE ESSENTIAL REQUIREMENTS OF THE
STANDARDS 98/37 EC
AUTOMATIC GATE MANUFACTURERS
®
s.n.c.
The manufacturers reserve the right to change the products without any previous notice
Distributor’s box
• DECLARATION OF CONFORMITY
• GENERAL WARNINGS
• EN 12453, EN 12445 STANDARDS
• CEI EN 60204-1 STANDARDS
• WARRANTY CERTIFICATE ON THE CUSTOMER’S REQUEST
Meccanica Fadini recommends the control panel
ELPRO 13 CEI
to
achieve an installation that is in conformity to the existing safety
standards.
The electronic programmer ELPRO 13 incorporates and can provide
all the functions which are required by the most demanding
applications with swinging gates.
In addition to the standard features of a conventional control box
type ELPRO 9 (see page 8 pic. 13) the following requirements can
be provided: “stroke reversing pulse”, pedestrian mode, stop in any
gate position by holding down the remote control button. Among
the added features and improvements of ELPRO 13 in conformity to
the European safety standards, there is the mains rotary switch: it
is fitted to the box cover and switches off the mains voltage whenever
the cover is removed.
WARNINGS
- It is recommended to keep to the instructions here outlined - check the specifications on the motor sticker with your mains
supply.
- Dispose properly of the packaging: cardboard, nylon, polystyrene, through specializing companies.
- Should the operator be removed,
do not cut
the electric cable. This must be properly removed from the terminal board in the
junction box.
- Switch off the mains switch before removing the junction box cover where the electric cable of APROLI 280 BATT is terminated.
- All the system must be earthed by using the yellow/green wire, marked by its specific symbol.
- It is recommended to read the regulations, suggestions and remarks quoted in the booklet "Warnings".
- Should APROLI 280 BATT be removed for maintenance, servicing or repair, tighten the air bleeding screw to prevent oil coming
out of the reservoir during transport.
Made in Italy
®
The “CE” mark certifies that the operator conforms to the essential
requirements of the European Directive art. 10 EEC 73/23, in relation
to the manufacturer’s declaration for the supplied items, in
compliance with the body of the regulations ISO 9000= UNI EN 29000.
Automation in conformity to EN 12453, EN 12445 safety standard.
STATIC GATE WEIGHT
400 Kg each leaf
13
CEI
SINGLE-PHASE
CUT OFF MAINS SWITCH
l apricancello
Linea
grafica
3-2003
