E-SL 450BD Series Instruction Manual
Temporary Safety Jumpers and Dip Switch Settings
12
If you are not using a safety device like a photo
eye or safety loop the Photocell terminal must
re-main jumped to the GND terminal.
PHOTO jumped to GND
Dip Switches
—To change any dip switches, you
must turn the power off before changing the setting.
1.
ON:
Auto-close on (the gate will re-close from
the open position after a time set in the
programming sec-tion)
OFF:
Auto-Close off
ON:
Dual gate opener (2 motors)
OFF:
Single gate opener (1 motor)
ON:
Electric Lock being used
OFF:
Electric Lock not used
2.
3.
IMPORTANT:
We recommend before turning the gate opener on for the
first time to have dip switch 1 OFF. If the dip switch is set to on, the gate will
auto-reclose after turning it on without any intentional activation on your
part.
