Essilor MYOPIA EXPERT 700 Скачать руководство пользователя страница 120

Страница: 120 / 132

118

17.8.1 Password protected Login

The options allow protecting with a password the access to the MYOPIA EXPERT 700 on-board application

operations and data. By default, the option is enabled but requires the password to be configured.

When the option is enabled, and the password configured the login is prompted when:



the MYOPIA EXPERT 700 on-board application starts



the auto Log OFF timeout occurs (if enabled)



the lock button in the main top bar is pressed

Press on the “Configure Password” button to define the preferred pas

sword.

It is recommended to use a strong password. The password is case-sensitive. No password strength

checks are applied.

It is recommended to apply a password aging policy.

Type the desired password in the password field and type it again in the confirm password field.

17.8.2 Screen Saver / Auto Log OFF

The option allows setting automatic locking of the MYOPIA EXPERT 700 on-board after a configurable

timeout.

By default, the option is enabled with the timeout set to 15 minutes.

When no interaction with the device is performed during the timeout, the screen saver will be displayed.

When the screen saver has closed, the login screen (if enabled and configured) will be displayed.

Содержание MYOPIA EXPERT 700





































































































































Результаты поиска

Содержание MYOPIA EXPERT 700

Отзывы:

Бренды по названию

Популярные бренды

Essilor MYOPIA EXPERT 700, Руководство пользователя

Результаты поиска

Содержание MYOPIA EXPERT 700

Отзывы:

Бренды по названию

Популярные бренды