ESS InLine 20-Ten Series, Инструкция по установке и эксплуатации

Страница: 8 / 33

IPS Belt Cleaner 8 19/11/2021
SECTION 3 - PREPARATION FOR INSTALLATION
1. Check Installation Drawings -
Ensure that you have the correct drawings and
equipment for your conveyor(s).
2. Pre-assemble the Cleaner(s) and Mounts
- Do this in your workshop or
similar free area, rather than at the Conveyor. This will enable you to:
verify all required equipment is present
familiarise yourself with the cleaner assembly
allow you to plan the installation, reducing installation time.
3. Assemble the Necessary Tools & Safety Equipment Required for the
Installation.
4. Observe the Conveyor While Running and Conveying Material
Observe the belt splice condition
Does the belt run true, or track off to one side?
Is the Head Pulley out-of-round?
Consult
ESS if any UNUSUAL conditions are observed in the above. These conditions may
result in recommendation of a different installation position or even a different cleaner.