[email protected] phone +39 0444 419762
www.esmach.com
p.
71
English
ATTENTION
Once placement and/or installation in a definite place have been completed, before authorizing or
following its start-up, make sure that the machine is equipped with all devices concerned and in
particular, the safety device, described in this manual and in any eventual commercial
documentation.
The present manual is an integral part of the machine and has to be added to
it in case of transfer or
sale of the same, at any title and free of charge.
In paragraph 2.1 destination for use of the machine and details about any allowed or not allowed usage are
given.
1.2
INSTRUCTIONS AND GENERAL WARNINGS
The manufacturer declines any responsibility for damages to people, animals or things caused by the non –
observance or non-respect of instructions, information, suggestions, recommandations for installation, use
and maintenance contained in this manual and in particular :
-
Do not alter/modify
any guard and safety device the machine is equipped with;
-
Do not remove
any guards and
do not deactivate
the safety devices the machine is equipped with,
unless deemed as strictly necessary and in taking all preventive measures to reduce the risks arising from
it;
-
Re-assemble
the guards and
re-activate
the safety devices as soon as there are no more reasons for
which the temporary removal/deactivation was necessary;
-
Do not use
the machine for uses and/or loads being different from the ones given by the Manufacturer;
-
Carry out
daily checks to safety device, levels and state of the technological fluids if present and to the
general state of the machine as well;
-
Carry out
a careful daily cleaning of the machine;
-
Take
all
necessary measures and precautions
in carrying out any adjustement, cleaning and
maintenance operations in order to avoid any accidental starting up of the machine or its parts by others;
-
Observe
the European Directives and the laws of the State concerned for the workplace where the
machine is used; in particular ( but not limited to) the ones regarding the safety, food hygiene, safety and
health at workplaces, individual protection devices, environment protection warning signs;
-
Observe the limits of the climatic conditions and usage allowed:
environmental relative humidity
90%, room temperature : min 4°C, max 40°C, altidute on the sea level : 1000 m max.
-
The company employer
shall have to provide adequate information, training, even practical (training) to
the operators about the correct and safe use of the machine.
-
The operator has to wear proper adherent outfit only, i.e.
no free parts, jackets, open shirts etc, jewels
(rings, bracelets, necklaces etc) are allowed, any eventual long hair is to be kept collected ( for ex. in a
suitable cap); the working outfit has to comply with the hygiene food products requirements.
-
Do not allow the entrance in the room where the machine is operating or the approach of the same
to lay-users, minors or anybody else not expressely authorised;
- if the machine is connected to other equipment or, implemented in a complex assembly, the manufacturer
shall have to assess any major or minor risk, arising from this operation, carry out adequate measures to
eliminate it or reduce it as much as possible, observe all requisites according to the laws, directives ,
standards etc. related to (Directive 2006/42/CE among the ones) and declare the conformity of the whole to
the regulations of the same.
-
use spare parts only
, if deemed as necessary and purchase them from Esmach S.p.A.; this latter – in
case of non-original spare sparts usage- declines any responsibility for damage to people, animals or
things which may arising from this.
-
Any arbitrary modification
, made to the machine,
releases the manufacturer from the responsibility
for any eventual damage caused to people, animals and/or things which may arising from this.
