Esmach SPI 100 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 65

Esmach SPI 100 Скачать руководство пользователя страница 48

[email protected] phone +39 0444 419762

www.esmach.com

p. 113

English

5

SAFETY

5.1

PREAMBLE

The considerations, made in this chapter, are based on condition that:

••••

The conditions and the destination for use of the machine, foreseen and described in this manual, are
well known to the principal/user and to any other operator in charge of the use of the machine.

••••

The operators have been adequately informed and , if needed, trained in relation to the risks existing at
work place and in compliance with the existing laws.

••••

The access to the work place is prohibited to non-authorized people, lay-users and minors.

5.2

HAZARDS, SAFETY DEVICES AND RESIDUAL RISKS

Some information concerning the hazards being typical of  the machine and risks related to are given
herewith along with the measures to be taken to eliminate them or reduce them; wherever a risk had not
been not eliminated , some information regarding the residual risks and  any eventual measure to be taken
by the user , in order to limit more an more their extent,  are given as well.

5.2.1

TYPICAL MACHINE HAZARDS

Referring to Picture 26 the machine is characterized by the following hazards:

Mechanical :

A. Crushing, shearing, dragging, impact:

volume involved through the spiral in motion

B. Dragging:

space between the bowl in motion and the base column

( also between the bowl base and the

base area of the base, but the risk is almost null and void); the hazard is present on both sides of the
machine considering that the rotation motion of the bowl can be reversed by the operator

C. Shearing, dragging, crushing, impact

: transmission gears of the motion to the spiral

D. Shearing, dragging, crushing, impact

: transmission gears of the motion to the bowl

E. Impact, crushing, injury:

in case of quick fall of the cover:

between the upper edge of the bowl and the

cover, between the side edges of the flour guard and cover.

Electrical :
F. Electrocution:

per contact with parts in tension V

≥

50V a.c. ( for ex. inside the electrical box )

Picture 26 – Typical Mechanical and Eletrical Machine Hazards

B

C

D

E

F

A

E

«
...
46
47
48
49
50
...
»

Содержание SPI 100


































































Отзывы:

Нет отзывов