Esmach SPI 100 Скачать руководство пользователя | Manualshive

Страница: 16 / 65

background image

[email protected] phone +39 0444 419762

www.esmach.com

p.

81

English

Picture 7 – Pallet or Cage Lifting up and Handling by means of a Fork Lift Truck

CAUTION!

No different lifting devices and/or systems from the ones described are to be used.
Adopt all possible precautions in handling and/or transporting the machine and its parts in order to
avoid or reduce any risks to people, animals or things.

Remove any eventual packaging from the machine; in this case separate the different materials per type of
packaging ( rivets, plastic, wood etc) and place them in a suitable waste collection point, accessible to
authorized personnel only and waiting to be collected from the disposal firms concerned.

The waste

disposal, according to the strict regulations and respect of the environment, are obligations clearly
and unequivocally imposed by the existing laws.

Check the integrity of the machine in all of its parts; in case of doubt contact the Manufacturer.
To move the machine from the pallet or from the cage and, in general, to lift the machine released from its
packaging, and according to the devices at disposal, it is allowed to :

a) use the fork lift truck with a suitable capacity ( the mass is given in par. 2.4) as shown in Picture 8.

Picture 8 - Machine Lifting up by

means of a Fork Lift Truck

b) use a suitable lifting belt ( the mass is given in par. 2.4) to connect to a lifting device hook ( bridge crane,

console table crane, jib crane, etc.). In this case the

lifting belt end extremities cannot be lifted up by

means of the forks of the forklift truck

: the load

would not be protected against falling down and could

cause a rolling over of the fork lift truck. The lifting belt has to be 3 m long at least and has to go across
under the head of the base as follows (Picture 9) :
- remove the top cover of the head  (the part without control panel only) following the instructions given in
par. 4.3.2 ( cover (1) Picture 14); if a rocker arm suitable to lift load is at disposal, no cover removal is
necessary

- lift the bowl cover and let one belt extremity (eyebolt) go through between the spiral arm and the flour

guard ; when the eyebolt is out from the head of the base, hold the belt horizontal ( in plane) and
introduce it between the flour guard and the head of the base (Picture A)

≥

200

mm

«
...
14
15
16
17
18
...
»

Содержание SPI 100


































































Отзывы:

Нет отзывов

Похожие инструкции для SPI 100

Бренд: NBE Страницы: 28

Бренд: Professional Sound Corporation Страницы: 4

Бренд: Heinner Страницы: 14

Бренд: XTE Electronic Страницы: 11

Бренд: GAI-Tronics Страницы: 88

Бренд: Numark Страницы: 12

Бренд: Russell Hobbs Страницы: 16

SIRIUS ACT 3SU1803-3NB00-1AE1

Бренд: Siemens Страницы: 5

Бренд: Siemens Страницы: 4

Бренд: Siemens Страницы: 11

Бренд: Denon Страницы: 36

Бренд: GÜDE Страницы: 40

Бренд: GÜDE Страницы: 68

Бренд: GÜDE Страницы: 80

Бренд: Medion Страницы: 22

Бренд: Gemini Страницы: 19

Бренд: Meganex Страницы: 33

SmartMixer AT-MX381

Бренд: Audio Technica Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды