20
Kongsberg X-series
10.
Once the Carriage Beam reaches the upper Home position, the gantry moves the board forward
toward the cutter. The gantry stops at the “Place Position Location”.
11.
See Low Advance to Cutter Option and Double Pick Options for other methods to place the board to
the cutter conveyor.
12.
The Carriage Beam lowers the board to the Support Table. The leading edge of the board will
overlap onto the cutting table approximately 150mm.
13.
The i-BF will release the board to the cutter and the gantry and carriage beam return to Home
positions.
14.
See “Hold at Place Position Option”
15.
The i-BF will report to the cutter that the board is ready.
16.
The i-BF will wait to pick the next board until the cutter signals “Pick Sheet” and the support table
sensor is unblocked (see Support Table Sensor).
20.10. Touch Screen Display for Feeder Operation
The Touch Screen display allows access to useful machine functions and system parameters.
On any screen, the green circle with a question mark symbol indicates there is an informational screen
available.
The informational screens contain helpful explanations related to the functions on the screen (in
English).
Pressing the green arrow buttons will advance through the available screens.
Pressing the right arrow button on each screen will eventually loop you back to the Main screen.
Note:
Information about more settings is available in Technical Manual, chapter
Board Feeder
>
Settings Screens
.
Main Screen
223
