12
Kongsberg X-series
Note:
In Q1/2017, the strong springs used earlier were replaced by a set of softer springs, in order to
avoid the foot scratching the material surface.
If needed, a set of strong springs, together with a replacement procedure, is available in the tool kit
included in the shipment.
12.12.
Laser Pointer
The
Laser Pointer
(L in the illustration) is a Class II
laser beam pointing device. Wavelength: 650 nm, 1
mW.
The
Laser Pointer
is used in adjustment wizards
and job execution to indicate current position on
the table.
The
Laser Pointer
is lit as long as it indicates the
correct current position.
If there is no manual operation of the table, the
Laser Pointer
will be switched off after a 30 sec.
time out. Pressing any button on the
Operators
Panel
will switch the
Laser Pointer
on again.
125
