User’s Guide
Special keys
F.3
. . . On an ESI phone with a three-line display
1.
While your station is idle (or just after receiving dial tone), press
ESI-DEX
. This causes the
Esi-Dex
menu
to appear, as shown:
2.
Press a key to choose the appropriate Dex —Station Dex (
STA
), System Dex (
SYS
), or Personal
Dex (
PER
) — or press
RELEASE
to cancel the procedure.
Notes:
System Dex isn’t available on every system.
For the remainder of this example, we’ll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
The display now reads:
3.
Choose the desired name from the selected Dex, using one of two methods.
Either:
(a.)
Scroll
— Press the scroll keys (
and
) to look up and down through the Dex until you find
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.)
Dial-by-name
— Dial up to the first three characters
1
of the extension, department, or guest
mailbox name. For example: if you want to call John Doe, dial
5 6 4
(because it spells
J O H
).
You’ll begin to see names that begin with those letters. You can then use the scroll keys (
and
) until you find the desired name and number.
4.
Press
DIAL
to place the call.
1
You can also dial just one or two characters, and then press
#
to enter.
