ESCO Technologies ETS-LINDGREN MAPS 2112 Series, Руководство пользователя

Страница: 33 / 38

33
5. Verify that the unit is level.
6. Position the wooden turntable top on the turntable base.
7. Use a 5/16 Allen wrench to tighten the bolts.
8. Secure the turntable top seams in place with a Phillips screwdriver.
9. Verify the access port is located over the limit switch.
10. Position the actuating pins in the holes on each side of the access port.
Controller Interface
For information about connecting fiber optic cables from the MAPS to the positioning controller, see the controller
manual.
Absorber Installation
After the leveling and bore sight is achieved, position the absorber that surrounds and covers the unit.
Position the actuating pins on each side of the limit switch access port.
Attach the wooden turntable top