ESCO Technologies ETS-LINDGREN MAPS 2112 Series, Руководство пользователя

Страница: 26 / 38

26
Using the Tension Scale to Measure and Set Belt Tension
Caution: Do not over tighten the belt. Over tightening will reduce overall
performance and cause component failure. The belt does not require a
high degree of tension for normal operation.
Caution: Using the included tension scale, follow the steps in this
section to set the belt tension for the MAPS: 48 oz maximum.
Located on the back of the mast is the belt tensioner.
Use this to reduce or increase the tension on the
belt.
1. Loosen the three belt tensioner bolts to release all
tension on the belt.