ESCO Technologies ETS-LINDGREN MAPS 2112 Series, Руководство пользователя

Страница: 11 / 38

11
Positioning Controller
A positioning controller such as the ETS-Lindgren EMCenter™ Modular RF Platform (with EMControl™ Positioner
Controller Plug In Card) is required for operation, and is sold separately. Contact ETS-Lindgren for ordering
information. The EMCenter replaces the 2090 Controller, which has been discontinued. The basic controller
configuration is an EMCenter with an EMControl card. This assembly is ETS-Lindgren part number 125241.
Check ets-lindgren.com or contact ETS-Lindgren to ensure that your EMCenter, the EMControl card, the backplane,
and display all have the current firmware versions.
EMCenter:
V5.21 (or later)
EMControl (7006-001) Card:
V2.5.6 (or later)
Backplane:
V2.3.0 (or later)
Display:
V1.4.10 (or later)
The EMCenter is also expandable with a variety of additional options available. Please contact ETS-Lindgren with
any questions.
Note: Existing ETS-Lindgren positioning controllers can be used with the
Model 2112/2117/2122; contact ETS-Lindgren to confirm your controller is
installed with the required firmware.
The 2090 requires firmware revision V 3.21 or higher. It is available for
download at ets-lindgren.com and requires the program Flash Upgrade
Wizard V 4.0 (also available at ets-lindgren.com).
The positioning controller directs the motor drives for the upper roll (phi axis) and the rotation of the turntable
( theta axis).
EMCenter Modular RF Platform
Tension Scale
To measure the tension on the belt, a tension scale is included with
the DD MAPS. You must use this scale to make sure there is no
excessive tension on the belt.
See
Using the Tension Scale to Measure and Set Belt Tension,
page
26, for the steps to measure and set the tension on the belt.