Erskine Attachments 420855 страница 31 Скачать руководство пользователя | Manualshive

Страница: 31 / 32

background image

31

LIMITED WARRANTY

Erskine  Attachments  LLC  warrants  each  new  machine  manufactured  by  us  to  be  free  from
defects in material and workmanship for a period of twelve (12) months from date of delivery to
the original purchaser.

Our  obligation  under  this  warranty  is  to  replace  free  of  charge,  at  our  factory  or  authorized
dealership, any part proven defective within the stated warranty time limit.

All  parts  must  be  returned  freight  prepaid  and  adequately  packaged  to  prevent  damage  in
transit.

This warranty does not cover:

1.

New products which have been operated in excess of rated capacities or negligence

2.

Misuse, abuse, accidents or damage due to improperly routed hoses

3.

Machines which have been altered, modified or repaired in any manner not
authorized by our company

4.

Previously owned equipment

5.

Any ground engaging tools in which natural wear is involved, i.e. tooth tips, cutting
teeth, etc

6.

Normal maintenance

7.

Fork tines

8.

Hydraulic motors that have been disassembled in any manor

In  no  event  will  the  Sales  Representative,  Dealership,  Erskine  Attachments  LLC,  or  any  other
company affiliated with it or them be liable for incidental or consequential damages or injuries,
including but not limited to the loss of profit, rental or substitute equipment or other commercial
loss.  Purchaser’s sole and exclusive remedy being as provided here in above.

Erskine Attachments LLC must receive immediate notification of defect and no allowance will be
made for repairs without our consent or approval.

This warranty is in lieu of all other warranties, express or implied by law or otherwise, and there
is no warranty of merchantability or fitness purpose.

No  agent,  employee,  or  representative  of  Erskine  Attachments  LLC  has  any  authority  to  bind
Erskine Attachments LLC to any warranty except as specifically set forth herein.  Any of these
limitations  excluded  by  local  law  shall  be  deemed  deleted  from  this  warranty;  all  other  terms
apply.

This  warranty  may  not  be  enlarged  or  modified  in  any  manner  except  in  writing  signed  by  an
executive  officer  of  Erskine  Attachments  LLC  to  improve  its  products  whenever  it  is  possible
and  practical  to  do  so.    Erskine  Attachments  LLC  reserves  the  right  to  make  changes  and  or
add  improvements  at  any  time  without  incurring  any  obligation  to  make  such  changes  or  add
such improvements to products previously sold.

Erskine Attachments LLC

P.O. Box 1083 Alexandria, MN 56308

Phone (218) 435-4045 Fax (218) 435-5293

«
...
29
30
31
32
»

Содержание 420855

































Отзывы:

Нет отзывов

Похожие инструкции для 420855

Бренд: Fein Страницы: 128

Бренд: Fein Страницы: 53

Бренд: Fein Страницы: 79

Бренд: Fein Страницы: 84

Grit GIC Series

Бренд: Fein Страницы: 100

Бренд: Fein Страницы: 3

Бренд: Parkside Страницы: 56

Бренд: Parkside Страницы: 32

Бренд: Parkside Страницы: 75

Бренд: Parkside Страницы: 53

Бренд: Parkside Страницы: 126

Бренд: Parkside Страницы: 112

Бренд: Parkside Страницы: 61

Бренд: BRODBECK IRONWORKS Страницы: 23

Бренд: Baileigh Страницы: 32

Бренд: Weston Страницы: 10

Бренд: Matco Tools Страницы: 19

Бренд: Hitachi Koki Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды