Erskine Attachments 420855, Руководство оператора

Страница: 4 / 32

4
SAFETY
Improper operation can cause serious
injury or death.
Pre-operation

This attachment is designed to be used for
grinding stumps from just above ground level to
below ground level.
NEVER use this machine for
any other purpose.

Read the operator
’s manual for the “Compact
Tractor”.
NEVER allow untrained people to operate.

Operating instructions must be given to everyone
before operating this attachment and at least once a
year thereafter in accordance with OSHA regulations.

NEVER exceed the maximum recommended input
power or speed specifications for the attachment.
Over-powering or over-speeding the attachment may
cause personal injury and/or machine damage.

Keep all shields, guards, and covers in place.

Do not modify equipment or add attachments that are
not approved by Erskine Attachments LLC.

Use adequate safety warning lights and devices as
required by local regulations. Obey all local laws and
regulations regarding machine operation on public
property. Always call before you dig (1-888-258-
0808). When you call, you will be directed to a
location in your state/city for information about buried
lines (electric, telephone, cable TV, water, sewer,
gas, etc.).

Only use attachment with a tractor equipped with a
Roll Over Protection System (ROPS) and seatbelt.
Operation

Avoid loose fitting clothing. Clothing or hair caught in
moving parts may lead to serious injury or death.

Avoid wood dust inhalation. Wear an approved
respirator (minimum N95 type) or operate with an
enclosure that provides similar protection.

Always wear eye protection that meets ANSI z87.1 or
operate with an enclosure that provides similar
protection.

To protect the operator from hearing loss, ear
protection is required unless the tractor is equipped
with a noise reduction cab that meets OSHA 1910.95
standard.
Operation (continued)

Hydraulic connections may be hot after use. Use
gloves if connecting or disconnecting after use.

Check and be sure all operating controls are in neutral
before starting the engine.

Keep people away from tractor, attachment and
discharge when in use. This attachment sends objects
flying and has rotating parts.
NEVER direct discharge
toward people
– rocks and debris can be thrown.

NEVER operate near embankments or terrain that is so
steep that rollover could occur.

Always stay in the operator position with seatbelt
fastened when using the attachment.

Before leaving the operators position, disengage PTO
drive, lower the attachment to rest flat on the ground,
stop engine, set park brake, and wait for all motion to
stop.

NEVER place hands in the discharge area or clear
debris while the engine is running.
Avoid High Pressure Fluids Hazard

Escaping fluid under pressure can penetrate
the skin causing serious injury.

Avoid the hazard by relieving the pressure
before disconnecting hydraulic lines.

Use a piece of paper or cardboard, NOT BODY
PARTS, to check for suspected leaks. Wear protective
gloves and safety glasses or goggles when servicing or
performing maintenance on hydraulic systems.

If an accident occurs, see a doctor immediately. Any
fluid injected into the skin must be surgically removed
within a few hours or gangrene may result.
Maintenance

NEVER make adjustments, lubricate, clean, or perform
any service on the machine while it is in operation.

Make sure the attachment is serviced on a daily basis.
Improper maintenance can cause serious injury or
death in addition to damage to the attachment and/or
your equipment.