Instalacion_10
v1.2.fm -
10/12/07
VULCAN hydraulic actuator
65
INSTALLATION
Loosen the discharge screw
Mount the gland and introduce the cable
1
Once the actuator is mounted on the supports, turn
the discharge screw (1) once to allow the correct
operation of the hydraulic system.
O
If you have to dismount the actuator from its
supports, first tighten the discharge screw in
order to prevent the hydraulic fluid from
leaking.
1
Introduce the cable (3) through the gland PG11 (1).
2
Position the gland in the top (4) and attach using the
nut PG11 (2).
3
Crimp the Faston connectors in the electrical cables
(5).
