In
stalacion_10
v1.2.fm
- 10
/12/0
7
English
VULCAN hydraulic actuator
57
INSTALLATION
1
NECESSARY TOOLS
Set of screwdrivers
Fixed wrenches
Socket wrench (8 mm)
Set of Allen keys
Pincers for Faston terminals
Marker pencil
Level
Tape measure
Welding machine
n
Use the welding machine in line with the use
instructions.
2
INITIAL CONDITIONS AND CHECKS
Initial conditions of the door
n
Check that the size of the door is within the
admissible range of the actuator (see the
technical characteristics of the actuator).
n
If the door to be automated has a passage
door, install a safety device to prevent the
actuator from operating with the passage door
open.
)
The door must have a closing stopper and an
opening stopper.
)
The door must be easy to manipulate manually,
namely:
•
This must be balanced, in order to ensure the effort
made by the motor is minimum.
•
There should be no stiffness throughout its travel.
n
Do not install the actuator in a door which does
not work correctly in manual operation, as this
may lead to accidents. Repair the door before
installing.
Environmental conditions
n
This device is not suitable for installation in
inflammable or explosive environments.
n
Check that the admissible environmental
temperature range for the actuator is suitable
for the location.
Electrical power supply installation
n
The electrical connections shall be made in line
with the instructions in the control panel
manual.
)
The electrical cable section is indicated in: “Fig. 1
Elements of the complete installation” on page 51.
