Seg
u
ridad_10 v1
.2.fm -
10/12/07
50
Installation manual
GENERAL SAFETY INSTRUCTIONS
1
SYMBOLS USED IN THIS MANUAL
This manual uses symbols to highlight specific texts. The
functions of each symbol are explained below:
n
Failure to respect the the safety warnings could
lead to accident or injury.
-
Work sequences or procedures.
)
Important details which must be respected for
correct assembly and operation.
,
Additional information to help the installer.
}
Information on care for the environment.
2
IMPORTANCE OF THIS MANUAL
n
Read this manual in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.
,
Moreover, this manual provides valuable
information which will help you to carry out
installation more efficiently.
)
This manual is an integral part of the product. Keep
for future reference.
3
ENVISAGED USE
This device has been designed for installation as part of
an automatic opening and closing system for hinged
doors and gates.
n
This device is not suitable for installation in
inflammable or explosive environments.
n
Failure to install or use as indicated in this
manual is inappropriate and hazardous, and
could lead to accidents or failures.
4
INSTALLER'S QUALIFICATIONS
n
The installation should be completed by a
professional installer, complying with the
following requirements:
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
(metal, wood, brick, etc) and the weight and
effort of the mechanism.
• He/she must be capable of carrying out
simple electrical installations in line with the
low tension regulations and applicable
standards.
• He/she must be capable of carrying out
simple masonry work (digging of pits,
channels, preparation of cement).
n
The installation should be carried out bearing
in mind standards EN 13241-1 and EN 12453.
5
AUTOMAT SAFETY ELEMENTS
This device complies with all current safety regulations.
However, the complete system comprises, apart from
the actuator referred to in these instructions, other
elements which should be acquired separately.
)
The safety of the complete installation depends on
all the elements installed. Install only Erreka
components in order to guarantee proper
operation.
n
Respect the instructions for all the elements
positioned in the installation.
n
We recommend installing safety elements in
VUS models. In other models, it is obligatory to
install them in order to comply with standard
EN 12453:2000.
,
For further details, see “Elements of the complete
installation” on page 51.
