Ericsson ECN320, Руководство пользователя

Страница: 86 / 188

Command Line Interface
78
1553-CNH 160 0787 Uen PA2 2005-09-23
11.6.1 copy-dslport
Use this command to copy a DSL-port configuration from one port to an-
other.
Command level:
ecn330(config)#
Syntax
copy-dslport from <dslport> to {< dslport> |all}
Arguments:
•
from <dslport> -
Insert the no. of the DSL-port to copy from
in the format
a.b.c,
which refers to the ECN port (
a
), the ESN108
port (
b
) and the IP DSLAM line (
c
).
•
to <dslport >/all -
Copy configuration to the specified DSL
port or to all the ports. Insert the DSL-port no. in the format
a.b.c
.
Default Setting
None.
Command Usage
This command is used to copy a DSL-port configuration from one port to
another.
Example
ecn330(config)# copy-dslport from 1.0.1 to 1.0.2
11.6.2 dslport
Table 6 dslport commands
Command Description Page
alarm-thresholds Set the alarm threshold for line perform-
ance 79
alarms Enable or disable line initialization failure
alarms 81
channel Set the bit rate and interleave delay on a
line 81