Epson Stylus Pro 7600 Photographic Dye Ink, Руководство по обслуживанию

Страница: 217 / 322

EPSON Stylus Pro 7600/9600 Revision A
Adjustment Overview 217
5.1.4.11 Cutter Solenoid ASSY or Paper Guide L Adjustment
Described below are the adjustment items to be made once the Cutter Solenoid (p.177)
has been replaced or the Paper Guide L has been reinstalled.
†
Adjusting tools:
„
Cutter Positioning Jig #F800
„
Scale 1000mm #F713
„
Scale Stopper #F714
†
Adjustment items (steps):
5.1.4.12 Damper ASSY Adjustment
Described below are the adjustment items to be made once the Damper ASSY (p.173)
has been replaced.
†
Adjustment items (steps):
5.1.4.13 Release Sensor (I/H Lever) Adjustment
No adjustment is required
5.1.4.14 Battery
No adjustment is required. Execute “ Initialize RTC (p.83) ”.
Table 5-13. Required Adjustment Items
Step Adjustment Item See
<Mechanism Adjustment>
1 Cutter Positioning Adjustment p.269
2 Checking for Proper Cutting and Cutter Position p.271
<Start the Self-diagnostic Function>
(Power OFF
→ [Paper Feed
∆
]
+
[Paper Feed
∇
] + [Cut/Eject]
→
Power ON)
p.220
3 Checking for Proper Cutting Pressure
4 Feed Corr T&B Adjustment
p.239
C H E C K
P O I N T
„
Execute ink discharge ( “Ink Blowing” ) before removing the
Damper ASSY.
Refer to
“ 5.2.3.20 Clean Head (p.256)” .
„
Secure the coupling screw and the ink tube by tightening at the
specified torque. (2
∼
2.5 kg/f)
Table 5-14. Required Adjustment Items (Damper ASSY)
Step Adjustment Item See
<Start the Self-diagnostic Function>
(Power OFF
→ [Paper Feed
∆
]
+
[Paper Feed
∇
] + [Cut/Eject]
→
Power ON)
p.220
1 Including initial filling p.259
2 Head Nozzle Checking (Cleaning) p.237
3 Leak check pattern printing p.259
4 Test Pattern Printing p.255