Epson Stylus Pro 7600 Photographic Dye Ink, Руководство по обслуживанию

Страница: 242 / 322

EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 242
5.2.3.8 Top & Bottom Adjustment
Conduct printing and paper cutting and input the distances between the Front Sensor
and the Head, between the Cutter and the Head and between the Edge Sensor 0 and the
Head (printing start position) to adjust the top, bottom and side margins.
„
Press the [Pause] key on the compensation value input screen, and the display
will change to “Top and Button”.
„
Press the [Enter} key on the input screen for “Top Length” or “Bottom
Length”, and the display will change to the input screen for “Bottom Length”
or “Side Margin”, respectively.
„
Press the [Enter] key on the input screen for “Side Margin”, and the display
will change to “Rear Sensor Position”.
†
Correction pattern of distances between the Front Sensor and the Head, between
the Cutter and the Head
„
Adjustment items: Top margin (Front Sensor position)
Bottom margin (cutter position)
Side margin (printing start position)
„
Printing method: Black 1 pass, Uni-D mode 180 dpi
„
Pattern drawing method: Printing direction: Uni-D
Resolution: 360dpi
Printing speed: 240CPS
Dot: NormalDot2
Figure 5-34. Menu Transition for Top & Bottom Adjustment
Figure 5-35. Print Pattern for Top & Bottom Adjustment
Printing Pattern
Top Length :
?
3.0mm
Bottom Length :
?
14.0mm
Side Margin:
?
3.0mm
[SelecType]
[SelecType]
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 0.1 mm.
[Enter]
[Enter]
[SelecType] [Enter]
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 0.1 mm.
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
* Setting is possible in increments of 0.1 mm.
Top margin (3.0mm)
Side margin
(3.0mm)
Pa
p
er
Fe
ed
D
ire
cti
on
Bottom margin (14.0mm)