Epson Stylus Pro 7600 Photographic Dye Ink, Руководство по обслуживанию

Страница: 24 / 322

EPSON Stylus Pro 7600/9600 Revision A
Product Description Basic Specifications 24
1.2.9 Ambient Conditions
1.2.9.1 Temperature/Humidity
Note *1: 120 hours max. at 60°C, one month max. at 40°C
*2: No condensation. These values are applicable only within the range as shown below.
Figure 1-2. Environmental Conditions: Temperature/Humidity
1.2.9.2 Vibration
†
During operation: 0.15G, 10 ~ 55Hz X,Y and Z directions
†
During storage: 0.50G, 10 ~ 55Hz X,Y and Z directions
1.2.9.3 Shock
†
During operation: 1G, 1ms max. X,Y and Z directions
†
During storage: 2G, 2ms max. X,Y and Z directions
NOTE 1: For storage, check that the print head is capped.
2: Before transportation, check that the print head is capped, remove the ink
cartridges, and close the ink cartridge cover .
3: If the power to the printer is OFF with the printer head uncapped, turn the
power ON with the ink cartridges installed. Then wait until capping is
completed, and turn the power OFF.
4: If the printer is left standing at temperature of -15°C or below, the ink in the
print head and ink cartridges will freeze. If the ink is frozen, leave the printer
standing at temperature of 25°C for more than three hours before its use.
Table 1-19. Temperature/Humidity
Condition Temperature*
1
Humidity*
2
During operation 10 ~ 35°C 20 ~ 80%
During storage -20 ~ 40°C 20 ~ 85%
During transport -20 ~ 60°C 5 ~ 85%
Temperature ( ° C)
Humidity (%)