Epson Stylus Pro 7600 Photographic Dye Ink Скачать руководство пользователя страница 50

Страница: 50 / 322

EPSON Stylus Pro 7600/9600

Revision A

Product Description

Operating Panel

Warning
When available rate is less than 10% (Total capacity 1300g), Maintenance tank
almost full warning occurs. The Maintenance Tank LED blinks.

Error
When available rate becomes 0, Maintenance tank full error occurs.
The Maintenance Tank LED lights up.

Counter clear
It is cleared with replacing maintenance tank.

1.4.3.22 Use counter

Ink used
Ink used with following operations is counted;

•

Print operation (irrespective of completion/discontinuation of printing)

•

All flushing operation

•

All cleaning operation

NOTE 1:

Ink used within IR command range is accumulated and displayed.

When there is no value to be displayed, the panel displays “---”.

Paper used
Paper used (paper fed) with print operation is displayed in centimeter. Manual
paper feeding is not counted.

NOTE 1:

Paper used within JS

JE command range is accumulated and

displayed.

When there is no value to be displayed, the panel displays “---”.

1.4.3.23 Clear use counter

Clear ink used counter
Reset “Ink used” to 0.

Clear paper used counter
Reset “Paper used” to 0.

1.4.3.24 Job history display

Job NO.
It is a Job number saved in the printer. The latest job is NO.0.

Paper use
Paper use of each job is displayed. (Area in m2)

NOTE:

Paper use is counted from JS command to JE command.

Ink use
Ink use of each job is displayed.

NOTE 1:

Ink use is counted within IR command or it is counted from JS command
to JE command.

When IR command is not set, ink use is not counted, and display value is not
changed.

When there is no value to display, “---” is displayed.

1.4.3.25 Job history clear

With this menu, job history saved in the printer is cleared.
Ink use and paper use of job history are displayed “---”.

1.4.3.26 Total prints

Total prints are displayed in decimal. (Max. 6 figures)

Содержание Stylus Pro 7600 Photographic Dye Ink



































































































































































































































































































































Результаты поиска

Содержание Stylus Pro 7600 Photographic Dye Ink

Отзывы:

Похожие инструкции для Stylus Pro 7600 Photographic Dye Ink

Бренды по названию

Популярные бренды

Epson Stylus Pro 7600 Photographic Dye Ink, Руководство по обслуживанию

Результаты поиска

Содержание Stylus Pro 7600 Photographic Dye Ink

Отзывы:

Похожие инструкции для Stylus Pro 7600 Photographic Dye Ink

Бренды по названию

Популярные бренды