Epson G650B, Руководство пользователя

Страница: 110 / 143

Solving Problems
101
■
Check for conflicts in your
SCSI ID number setting, I/O
address, the interrupt setting for
your SCSI board, and other
settings. For information about
the SCSI ID setting, see
page 11. For information about
choosing other settings, see your
computer manual.
■ Check your image source setting
in the Select Source window.
Make sure you selected
EPSON
TWAIN Pro
. (If you also
installed EPSON Scan Server
on your computer, make sure
it’s not running.)
■
If you don’t see
EPSON
TWAIN Pro
in the Select
Source window, uninstall your
software, then reinstall it. See
the instructions on page 107.
■
If you have another EPSON
scanner and have a previous
version of EPSON TWAIN
installed, uninstall the older
version. See the instructions for
uninstalling software on
page 107.
You can’t start EPSON TWAIN
Pro Network from a client
computer
■ Make sure the scanner, the
scanner server, and EPSON
Scan Server are turned on and
running. (See Chapter 6.)
■
Make sure the cables connecting
the scanner, the scanner server,
and the client computer meet
the system requirements on
page 126 and are properly
connected.
■
Make sure the correct IP address
for the scanner server is entered
in the EPSON TWAIN Pro
Network window for the client
computer. (See page 88.)
■
Make sure the network interface
card is installed correctly in
both the scanner server and the
client computer.
■ Make sure both the scanner
server and client computer are
running the TCP/IP protocol.
(If you need to install TCP/IP,
see Appendix A.)
■
If more than one scanner is
connected to the scanner server,
make sure the EPSON
GT-10000 is selected as the
default scanner.