Epson G650B, Руководство пользователя

Страница: 20 / 143

12
Setting Up Your Scanner
Setting the SCSI ID Number
The scanner’s SCSI ID number default
setting is 2. If you need to change this
number, turn the SCSI ID dial on the
back panel. Be sure to choose a unique
number that doesn’t conflict with the
ID number of other SCSI devices.
Don’t use SCSI ID 7, which is usually
reserved for the SCSI interface in the
computer. SCSI ID 0 and 1 are also
not recommended, as these may be
used for the hard disk.
Setting the SCSI Terminator
The scanner’s SCSI terminator is built-in, with a switch to turn it on or off on the
scanner’s back panel.
If the scanner is your only SCSI device, leave the terminator turned
ON
(the default
setting).
If the scanner is the last device in the chain, leave the terminator turned
ON
.