Epson G650B, Руководство пользователя

Страница: 15 / 143

7
Chapter 1
Setting Up Your Scanner
Setting up your scanner is easy—just follow the steps in this chapter in the order
listed below.
1. Unpack and choose a good place for your scanner.
2. Unlock the scanner.
3. Install the SCSI interface card in your computer (if necessary) or install the
optional IEEE 1394 interface board in your scanner.
4. Set the SCSI ID number and terminator switch (if necessary).
5. Initialize the scanner.
6. Connect the scanner to your computer.
After you’ve set up your scanner and SCSI card or optional IEEE 1394 interface, you
need to install your software as described in the next chapter, “Installing Scanner
Software” on page 25.
Unpacking Your Scanner
Remove the scanner from the box, then remove the tape and packing material from
your scanner. Save the packaging in case you need it later.
The scanner is large and heavy, so you may need to have someone help
you unpack and lift it.
Make sure you plug the scanner into a properly grounded outlet. Check
the system and location requirements and follow all the safety instructions
in Appendix C, “Notices.”