Epson EU-T532, Техническое руководство

Страница: 33 / 118

2-22 Operation Principles Rev. A
Confidential
(*1):
•
Effective only for the model type with the paper roll supply module
•
This setting lets the printer tell the paper nearend by sending the secondary paper nearend status when the
specified length of paper is fed after the primary paper nearend sensor in the paper roll supply module
detects the paper nearend.
(*2): Effective only when using with the cut sheet presenter module.
Definition of the primary paper nearend and the secondary paper nearend:
•
The primary paper nearend is defined as when the paper nearend sensor in the paper roll supply module detects
the paper roll nearend.
•
The secondary paper nearend is defined as when the paper is fed for the specific length after the primary paper
nearend is detected.
When the primary and the secondary paper nearends are detected, the status from the printer changes. However,
printer controls, such as the printing stop are not affected.
Table 2-10 Memory Switch 7
SW No. Function
ON (1) OFF (0)
Default setting
1
Reserved

Fixed to OFF OFF(0)
2 Setting for the
secondary paper
near-end position
Refer to Table 2-11
OFF(0) (*1)
3
4 Operation after
cutting Complete ejection Clamp
OFF(0) (*2)
5 Paper initializing
operation when the
power is turned on
Paper edge is
always cut. Paper edge is
detected.
6 to 8 Reserved

Fixed to OFF OFF(0)
Table 2-11 Setting for Paper Nearend Detecting Position
Paper length
(for the time between detecting the
primary paper nearend with the
nearend sensor and sending the status
of the secondary paper near-end)
Memory SW No.7-2 Memory SW No.7-3
Approximately 5 m {196.85"}
OFF OFF
Approximately 10 m {393.70"}
ON OFF
Approximately 20 m {787.40"}
OFF ON
Approximately 30 m {1181.10"}
ON ON