Epson EB-L30000U, Руководство пользователя

Страница: 102 / 283


All of the projectors support the stacking function of geometry
correction assist

All of the projectors have the same panel resolution

All of the projectors are projecting with the Projection mode set to
Front or Front/Ceiling

The projection size for all of the projectors is larger than the projection
size after stacking

The tiling function of geometry correction assist is not being used
a

We recommend performing auto adjustment at least 20 minutes
after turning on the projector or canceling the shutter function.

To increase the accuracy of adjustments, we recommend darkening
the room while projecting images and then making adjustments.

Auto adjustment is not available when using the following lenses.
ELPLR05, ELPLL09, and ELPLL10

Check the following before starting auto adjustment.
- The projector is connected to the network
- The projector has been configured in Epson Projector Professional Tool

Auto adjustment is performed using the camera built into the front
of the projector. Do not block the camera or the projected images.

The time necessary for auto adjustment varies according to the
location and number of projectors and can take up to approximately
10 minutes.

Point Correction is performed automatically.
Multi-Projection Function
102