Epson EB-L30000U, Руководство пользователя

Страница: 42 / 283

a
You can also adjust distortion in images using the remote control.
After adjusting the focus at the center of the lens using the [Focus]
buttons ([+] and [-]), use the [Distortion] buttons ([+] and [-]) to
adjust the surrounding image.
Registering and Loading Lens Adjustment Values
You can register a lens position whose lens shift, zoom, focus, and
distortion was adjusted in memory, and load it when necessary. You can
register up to 10 values.
a

If you did not calibrate your lens, a message is displayed when you
save a memory. Select
Yes to calibrate the lens.

The lens position when a memory is loaded may not completely
match the lens position when the memory was saved.

If there is a large discrepancy between the lens position when a
memory is loaded and the lens position when the memory was
saved, calibrate the lens.
s
Extended - Operation - Lens Calibration p.147
a
Press the [Memory] button while projecting.
a
You can also operate from the Configuration menu.
s
Settings
-
Memory
p.145
b
Select Lens Position , and then press the [ ] button.
c
Select the function you want to perform, then press the [ ]
button.
Function Explanation
Load Memory
Loads the saved memory. When you select a
memory name and press the [
] button, the lens
is automatically adjusted according to the settings
of the selected memory.
Save Memory
Registers current settings in the memory. When
you select a memory name and press the [
]
button, the settings are saved.
Erase Memory
Erases the registered memory. When you select a
memory name and press the [
] button, a
message is displayed. Select Yes , and then press the
[ ] button to erase the selected memory.
Installing the Projector
42