Epson EB-L30000U, Руководство пользователя

Страница: 149 / 283

Submenu Function
shutter status is maintained when the projector is turned
off.
Advanced : The following items can be set.

Beep : When this is set to On , the confirmation buzzer
beeps to notify you that the power turns on or off, or
cooling down is finished.

Indicators : When set to Off , the projector's indicators are
turned off, except for abnormality or warning.

Log Save Destination : Set where you want to save the
operation logs for the projector. Select USB and Internal
Memory to save the logs to the USB flash drive connected
to the projector’s USB-A port. Logs are saved as text files
(.log) on the USB flash drive.
The following logs are saved.
- Error information
- Laser information
- Temperature logs
- Operation logs
- Input signal identification logs

Batch Setup Range : Select All to copy all of the menu
settings using the batch setting function. Select Limited if
you do not want to copy the following settings.
-
EDID from the Signal menu
- All items except for the Notifications menu and the
Others menu from the Network menu

AC Voltage Monitoring : When this is set to On , and the
projector is turned off by any method (including direct
shutdown) except for pressing the power button, an AC
Voltage Waring dialog is displayed the next time the
Submenu Function
projector is turned on. Set this to Off if you use direct
shutdown regularly.
Date & Time : Make system time settings for the projector.
s
"Setting the Time" p.44
Lens Calibration : Select Start to perform lens calibration.
You can check if lens calibration has been performed from
History .
A/V Settings
A/V Output : Set this to Always On if you want to output
images to an external device even when the projector is in
standby status.
Monitor Out : Select the image source output to an external
monitor connected to the Monitor Out port when the
projector is in standby status. When set to
Auto , analog
RGB signals from the Computer port or the BNC port are
output depending on which source was selected when the
projector was turned off.
Standby Mode
This is only enabled when A/V Output is set to While
Projecting , and Control Communications and Extron XTP
are set to Off . If you set Communication On, you can
perform the following operations even if the projector is in
standby mode.

Monitor and control the projector over a network.

Communication from the HDBaseT port is enabled.

Set the IP address on the LCD display.
a
When monitoring or controlling the pro‐
jector using wireless LAN, set
Connection
Mode to Advanced .
s
Network - Wireless LAN - Connection
Mode p.154
List of Functions
149