Epson EB-L30000U, Руководство пользователя

Страница: 207 / 283

Check Remedy
Are you using a lens that does not support specific operations? Auto adjustment is not available when using the following lenses.
ELPLR05, ELPLL09, and ELPLL10
Is an analog signal being input? When inputting an analog signal, the color and brightness of the input image changes, and the results of adjustment may
not be applied correctly.
Is the screen warped or distorted? (Error Code: 0102) Use a flat screen with no warping or distortion.
Is the projector installed at an angle to the projection surface? (Error
Code: 0102) Install the projector so that it is parallel to the projection surface.
Has the image been corrected using Geometry Correction? (Error
Code: 0102) If the angle of projection onto the screen is too large, auto correction may not work correctly for images corrected using
Geometry Correction. Set
Geometry Correction to Off or reduce the correction range.
s
Settings - Geometry Correction p.145
Is the brightness of the surroundings appropriate? (Error Code:
0101) If a powerful spotlight or natural light shines into the area during auto adjustment, the brightness of the surroundings
changes and auto adjustment does not operate correctly. Make sure the brightness of the surroundings does not change.
Is the projected image being hidden by ambient light? (Error Code:
0102) If the projected image is hidden by ambient light, automatic correction does not work properly. Adjust the ambient light
so that the projected image is visible.
Are the colors in the projected image poor? (Error Code: 0101) Adjust the tint and the white balance of the projected image.
s
Image - Tint , White Balance p.141
Is the blending width appropriate? (Error Code: 0102) If the blending width in Edge Blending exceeds the following range, auto correction may not work properly. Check the
blending width.

Screen Matching 15 to 45%

Geometry correction assist (tiling and stacking functions): 15 to 43%
s
Extended - Multi-Projection - Edge Blending p.147
Is the amount of lens shift too large? (Error Code: 0102) Reduce the amount of lens shift.
s
"Adjusting the Position of the Projected Image (Lens Shift Adjustment)" p.37
Is the message "An error occurred during auto adjustment."
displayed? The following items explain the error codes displayed in the message.

During Screen Matching: 0101 Measurement value error; 0102 Measurement failure; 0103 Switch camera failure

During Color Matching: 0201 Measurement value error; 0202 Measurement failure; 0203 Switch camera failure
For more details, contact your local dealer or the nearest address provided in the Epson Projector Contact List.
s
Epson Projector Contact List
Are you projecting with a projector other than the EB-L30002U/
EB-L30000U? (Error Code: 0104, 0105) You cannot perform screen matching with projectors other than the EB-L30002U/ EB-L30000U.
Problem Solving
207