Epoke SKE Series, Инструкция по эксплуатации

Страница: 4 / 29

2
epoke
®
SKE8-12-15-20
GB-0305.1
epoke
®
1 Identification
1.1 Manufacturer and supplier
Epoke ® A/S
Vejenvej 50
Askov
DK-6600 Vejen
1.1.1 Copyright
The firm of Epoke ® A/S, DK-6600 Vejen owns the
copyright to this technical documentation.
Mechanical, photographic or other reproduction or dupli-
cation of this technical documentation or parts of it is for-
bidden. The technical documentation is only intended for
the purchaser and his personnel.
1.1.2
Technical documentation
This technical documentation contains:
• An instruction book
• List of spare parts
These appendices contain basic instructions which must
be followed and read by the fitter / user before assembly
and commissioning. The technical documentation shall
always be available where the spreader is used.
The personnel who will be involved in operation, servicing,
inspection and assembly shall have the corresponding
qualifications for these areas of work. The area of respon-
sibility, competence and monitoring of personnel must be
defined exactly by the employer. If personnel do not have
the necessary knowledge, they must be trained and
instructed. If necessary, this can be implemented through
the manufacturer/supplier as desired by the
purchaser/user of the spreader. Training abroad is carried
out by the local dealers. Moreover, the employer/user
must ensure that personnel have fully understood the
content of the technical documentation.
1.1.3 Warranty and liability
The general terms of sale and delivery apply unless agreed
otherwise and confirmed in writing upon entering into the
contract. Warranty liability and liability for damages are
excluded for personal injury and material damage if the
injury or damage may be due to one or more of the fol-
lowing reasons:
• Abnormal use of the spreader
• Inexpert assembly, commissioning operation and servi-
cing of the spreader.
• Driving with the spreader with defective safety devices
or incorrectly applied or non-functioning safety and pro-
tection devices.
• Non-compliance with the instructions in the technical
documentation with regard to safety, transportation,
storage, assembly, commissioning, operation and main-
tenance of the spreader.
• Design changes to the spreader which are not perfor-
med or approved by the manufacturer.
• Use of non-EPOKE original spare parts
• Inadequate monitoring of parts which are exposed to
wear.
• Inexpertly executed repairs