Epoke SKE Series, Инструкция по эксплуатации

Страница: 17 / 29

14
epoke
®
SKE8-12-15-20
GB-0305.1
5.2 Instructions for Initial Operation
5.2.2 Adjustment of spreading quantity (metering)
At metering or check of quantity per m
2
you must be aware
that the width of the spread is 136% of the width of the
delivery roller when the road speed is 20 km/h or above.
The measuring tray corresponding to a width of spread of
1 metre must therefore be 1:1.36=0.735 m.
10 g/m
2
= 10 kg per driven km in measuring tray 0.735 m
20 g/m 2 = 20 kg per driven km in measuring tray 0.735 m
30 g/m 2 = 30 kg per driven km in measuring tray 0.735 m
40 g/m 2 = 40 kg per driven km in measuring tray 0.735 m
You may either hang the measuring tray up below the
delivery roller and drive exactly 1 km. Or you may activate
the wheel of the spreader and count the turns. In the latter
case the following calculation must be made:
Turns of wheel per km =
1000
D x
π
D
Ex.: D = 0,540 m = 589 turns per km
1000
0,540 x 3,14
5
.4.2 Remote control
5.4.2.1 Correct installation
Direct current requirements for the electric control system
of the spreader: 11V - 32V.
When switching between 12V and 24V vehicles, working
lamp and rotating beacon must be switched accordingly.
5.4.2.2 Connection of remote control
• The electric remote control is connected to the spreader
by means of the multipoled plug on the remote control
cable, and connect it to the socket on the spreader.
• Plug the power supplying cable into the universal plug
on the vehicle (the lighter).
The remote control can be fastened in the cab using
mounting hardware (optional equipment), which is the
most suitable positioning for the remote control.
The remote control must be protected against the weather
when the spreader and thus the remote control are not in
use.
Gritting
Do not drive with engaged delivery roller without material in
the hopper in order to prevent unnecessary wear of the
rubber base.
If you wish to keep the marked width of spread the speed
should not exceed 25 - 30 km/h. At greater speeds the
width is increased through the wind, and widths of more
than 6,0 m may be acheived.