Epoke SKE Series, Инструкция по эксплуатации

Страница: 11 / 29

8
epoke
®
SKE8-12-15-20
GB-0305.1
2.2 Product descriptions
2.2.0.1 Machine overview
1
.1 SKE spreaders
2.2 Stabiliser
2.3 Stabiliser spindle
2.4 Pull device
3.1 Impellor shaft
3.2 Delivery roller
3.3 Rubber base
3.4.1 Spring base
3.4.2 Spring base stop
3.6
Spring base adjustment
3.7.1 Transmission from drive wheel, over downward
gearing to delivery drum
3.7.2 Transmission from delivery drum to mixer
3.8
Handle for manual operation of connection and
disconnection of spreading
5.5 Holder for transmission exposure
5.6 Rubber bonnet for transmission exposure
2.2.1 Product description
The Epoke SKE towed spreader is a surface-dependent
drum spreader for spreading salt, sand and grit.
The SKE spreaders are fitted with the Epoke dosing
system where the delivery drum and mixer are pulled from
the spreader drive wheel via mechanical gearing.
The SKE may be equipped with different gearings
(SKE8/SKE12 - 11%, 24%, 36%, 76% and SKE15/SKE20
- 24%, 38%) in the delivery drum in relation to the wheels.
Operation:
The wheels supply all the energy needed for
operation of the spreader, which is thus completely surface-
dependent.
Dosing system: The material tank and the supporting
frame are welded together. The tank is fitted with a mixer
shaft and a dosing unit. The mixer shaft prevents the
spreading material from building up, thus grinding and
distributing the spreading material over the entire length of
the tank.
The dosing unit is situated under the mixer shaft, consists
of the spring-supported rubber base and the delivery
drum, whose function is to dose the material to the road
surface. The drop, i.e. the distance between the road and
the dosing drum, is relatively small, thus making the spre-
aders practically insensitive to side winds and turbulence.
As a result, the spreading material is delivered where it is
needed, i.e. on the road surface.
Material volume: The indicated material volume is delive-
red surface-dependently at any speed of driving, as the
dosing unit speed depends on the vehicle speed. Set the
material volume (at input) by adjusting the spring base.
Stabiliser: The SKE features an ungraduated adjustable
stabiliser.
5.5
3.3
3.2
3.1
3.3
3.4.1
2.2
2.3
3.6
3.8
3.4.2
1.1
2.4
5.6
3.7.1
3.7.2